MicroSD Card won't eject

[xRevilatioNx]

I followed the manuals instructions to press the icon in the panel but it won't eject. Is their another way?

[Ads]

[DasHaus]

That icon doesn't eject it in the sense that it pops out of the device, that icon ejects it in the sense that it unmounts the file system. If you wan't to take the card out you have to actually push it in a little more and it should unlatch and spring out.

[xRevilatioNx]

Tried that. No such luck. Ouch...

[DasHaus]

I have no nails so it's tough for me too, I wound up having to use a second card to push against the one in the tablet.

Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

[xRevilatioNx]

I'll give that a try...... thanks.

[Rlarson_mn]

Needle noise pliers works also.

[Captnflex]

Same problem, SD card will not eject. Not impress

[WarmWind76]

Yeah, the microSD is a bugger to get out of the tablet. I have used another microSD to gently push in and "unclick" the one inserted. I don't know if it was designed purposefully that way so that the microSD can't inadvertently be expelled, but still, I am concerned that I can damage the microSD just by using a paper clip, or a dime, or whatever to push it down.

[Swipe]

The cards are designed to be ejected by pressing on them. I can get my cards ejected with little effort. I use a fingertip. I have no nails of any discernable length being of the manly persuasion. It's been more than six months since the [OP] posted so I suspect you just need to get a running start at it.

When I say "designed" I'll bet other tablets are employing the same sort of ejection mechanism and the card manufacturers are aware of that.

[elfaure2]

I used a ballpoint pen to push the card in then it popped right out. I also have no nails but then again I bite mine. Tried with the hand and it wouldn't go in far enough. It needs to go in about 1/32-1/16" before it unlatches and pops out. Make sure the card is unmounted and the tablet is off when you remove the SD.