When I replaced the lcd screen, I left the old bezel in there and put the new screen in (tight fit). However it became apparent that I would have to remove this. I started to use a hair dryer to heat up the double sided tape that holds the old bezel to the glass, but I panicked that the heat would damage the digitizer, so I pryed it off instead (BIG mistake). I ended up cracking the glass, .
I now have it back together fitting nicely, however, the top half of my screen is not responding ( I cracked the bottom right corner). I have removed and put back the connecting ribbon several times with no luck.
Anyone got any idea's on how to fix this? I really don't want to buy a digitizer as well. But if I have to, then I have to.