Page 32 of 32 FirstFirst ... 22 30 31 32
Results 311 to 320 of 320
Like Tree27Likes

Thread: [GUIDE] DIY TF300 Screen Replacement MEGA thread. ALL related posts here please.

  1. #311
    Soundwave
    Member #
    67790
    Join Date
    Mar 2014
    Tablet
    TF300T
    Posts
    9
    Liked
    0 times

    Wrong Digitizer and LCD combination

    I bought both at same time not knowing there were part numbers that had to match original, so i have a digitzer that doesnt work. I have to use a connector with a mouse to use tablet, is there anyway to get digitizer to work with lcd.

  2. #312
    Developer & Repair Magician
    Supporting Member

    Member #
    68238
    Join Date
    Apr 2014
    Tablet
    TF300T
    Posts
    1,417
    Liked
    335 times
    Yep. Install the correct one. Hopefully you got the numbers off the old one?
    Master Help Guide--guide to help from the masters:
    http://www.transformerforums.com/for...elp-guide.html

    T100 Master Help Guide:Caster's comprehensive guide to comprehending the T100
    http://www.transformerforums.com/for...elp-guide.html

    TF100 FAQ--Frequently Asked Questions about the TF100:
    http://www.transformerforums.com/for...s-guides-tips/

    What Got Me In to All This Trouble--Linux live CD with ADB & Fastboot:
    http://www.transformerforums.com/for...x-live-cd.html

  3. #313
    Soundwave
    Member #
    88013
    Join Date
    Nov 2015
    Tablet
    TF Book T300 Chi
    Posts
    1
    Liked
    0 times
    Have a read here, you can use touchscreens with different numbers but will need to flash the firmware for the matching screen.
    [Q] TF300 New Touchscreen problem / Touch PC… - Pg. 99 | Asus Transformer TF300T
    Hope this helps

  4. #314
    Soundwave
    Member #
    94047
    Join Date
    Sep 2017
    Tablet
    TF300T
    Posts
    3
    Liked
    0 times
    Hey everyone, I just read through this massive thread and I couldn't quite find the answer I was looking for.

    I have two TF300t tablets and I cracked the glass screen on one of them a couple days ago. The screen still displays OK, but the touch sensitvity is dead. I gather the LCD portion is fine, and I just need a new digitizer.

    I opened it up to check the flex cable to see which version I needed, but the cable doesn't list G01 or G03 or anything like that. There's a white sticker on it with three lines of numbers and letters, but that's it. I've attached a picture of the digitizer cable.

    I've also attached a picture of the label on the LCD part, which lists it as Rev 4.A00. Any ideas which digitizer I need to buy?


    IMG_20170917_002901.jpgIMG_20170917_002909.jpg

    Any help would be greatly appreciated! I need to get this tablet back in operation asap for work, or otherwise figure out a way to backup the data without a functional touch screen and then copy it to a new tablet.

  5. #315
    Developer & Repair Magician
    Supporting Member

    Member #
    68238
    Join Date
    Apr 2014
    Tablet
    TF300T
    Posts
    1,417
    Liked
    335 times
    Well, the last part anyway can be easily done if you have the hardware. You need either the keyboard dock for it, or the USB-OTG adapter, or the audio dock, or the connect dock. The first is common, the second is inexpensive. Then simply hook a mouse to it. The other possibility is ADB if you already have it enabled in the settings. If you don't know what that is, you probably don't. The reason you can't find the exact info you need is that Asus never released it, so if it's not right here in this thread, it's probably not available anywhere.
    janner43 likes this.
    Master Help Guide--guide to help from the masters:
    http://www.transformerforums.com/for...elp-guide.html

    T100 Master Help Guide:Caster's comprehensive guide to comprehending the T100
    http://www.transformerforums.com/for...elp-guide.html

    TF100 FAQ--Frequently Asked Questions about the TF100:
    http://www.transformerforums.com/for...s-guides-tips/

    What Got Me In to All This Trouble--Linux live CD with ADB & Fastboot:
    http://www.transformerforums.com/for...x-live-cd.html

  6. #316
    Soundwave
    Member #
    94047
    Join Date
    Sep 2017
    Tablet
    TF300T
    Posts
    3
    Liked
    0 times
    Thanks for the help! I think I'm going to give a try on the G03 digitizer and see if it works with my Rev 4 LCD. I'll let you know what I find out. In the mean time, I'll back up my tablet and maybe just buy a new one so I have something functioning while I mess around with replacing the digitizer.

  7. #317
    Developer & Repair Magician
    Supporting Member

    Member #
    68238
    Join Date
    Apr 2014
    Tablet
    TF300T
    Posts
    1,417
    Liked
    335 times
    As long as you're sure it's worth the trouble, by all means do so. The 300s are so obsolete now, but I'd sure miss mine if it went south. I just spent a few days recovering from a bad back, and the 300 kept me in reading material, must have gone through 3 full-length novels. And at least there's a current ROM available.
    Master Help Guide--guide to help from the masters:
    http://www.transformerforums.com/for...elp-guide.html

    T100 Master Help Guide:Caster's comprehensive guide to comprehending the T100
    http://www.transformerforums.com/for...elp-guide.html

    TF100 FAQ--Frequently Asked Questions about the TF100:
    http://www.transformerforums.com/for...s-guides-tips/

    What Got Me In to All This Trouble--Linux live CD with ADB & Fastboot:
    http://www.transformerforums.com/for...x-live-cd.html

  8. #318
    Soundwave
    Member #
    94047
    Join Date
    Sep 2017
    Tablet
    TF300T
    Posts
    3
    Liked
    0 times
    Update: I finally got a chance to install the replacement screen I bought on Amazon (white label version). I got everything changed out and put back together and it sort of works. The bottom row of the screen reponds to touch (mostly), but the rest doesn't, save for a few blips where something registers. Is there a weird secret to reassembling it I'm missing? I'm thnking maybe I just don't have the connectors for the digitizer seated all the way into their sockets. I did end up missing one screw for the outside edge.

  9. #319
    Chief Customizer & Super Moderator
    Supporting Member

    Member #
    47492
    Join Date
    Oct 2012
    Tablet
    TF700
    Posts
    2,724
    Liked
    711 times
    If it is a connection problem I would expect it to either work or not, but since you don't have anything to lose, by all means go back, take it apart and put it back together again. Seating the connectors is a little tricky since they are so small.
    At least if you have fingers like mine....

  10. #320
    Developer & Repair Magician
    Supporting Member

    Member #
    68238
    Join Date
    Apr 2014
    Tablet
    TF300T
    Posts
    1,417
    Liked
    335 times
    Mine used to work for that sort of thing. At least if I remember correctly.
    Master Help Guide--guide to help from the masters:
    http://www.transformerforums.com/for...elp-guide.html

    T100 Master Help Guide:Caster's comprehensive guide to comprehending the T100
    http://www.transformerforums.com/for...elp-guide.html

    TF100 FAQ--Frequently Asked Questions about the TF100:
    http://www.transformerforums.com/for...s-guides-tips/

    What Got Me In to All This Trouble--Linux live CD with ADB & Fastboot:
    http://www.transformerforums.com/for...x-live-cd.html

 

 
Page 32 of 32 FirstFirst ... 22 30 31 32

Remove Ads

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. Replies: 216
    Last Post: 08-23-2019, 05:50 AM
  2. Replies: 632
    Last Post: 05-10-2019, 02:36 AM
  3. The Transformer T100 Antivirus & Malware MEGA thread. ALL related posts here, please.
    By rscheller in forum Asus Transformer Book T100 FAQs, Guides & Tips
    Replies: 61
    Last Post: 02-09-2016, 05:23 PM
  4. Replies: 4
    Last Post: 05-20-2012, 06:02 PM
  5. Do I need to return it for a replacement? (ASUS TF300 - flickering screen)
    By Jessica in forum Asus Transformer (TF101) General Discussions
    Replies: 0
    Last Post: 05-20-2012, 03:25 PM

Search tags for this page

5158n fpc-1

,
5158n fpc-1 digitizer
,

5158n-fpc-1

,
asus tf300t cracked screen repair
,
asus tf300t repair
,
asus tf300t screen break soln
,

asus tf300t touch screen not working after replacement

,
asus transformer screen repair
,
flash player substitute for asus tf100
,

how to fix cracked asus transformer tf300 tablet screen

,

news

,
tf300t non responsive rep.ace ribbon
Click on a term to search for related topics.

Tags for this Thread

Powered by vBulletin® Version 4.2.3
Copyright © 2019 vBulletin Solutions, Inc. All rights reserved.
Search Engine Optimization by vBSEO 3.6.1
All times are GMT -6. The time now is 12:11 AM.